欢迎来广州欧复建筑材料有限公司官方网站!

广州欧复阿里巴巴店铺

你的位置:首页Device CenterFoam concrete block equipment > Waterproof block equipment
  • Name: Waterproof block equipment
  • NO.: a002
  • Time: 2016-08-08
  • 浏览次数: 100

External wall waterproof lightweight block equipment, for ordinary block (autoclave) waterproof problem, the company's new introduction of German patented technology and equipment, adjust the production process and formula, greatly improve the waterproof performance of the block, the product surface without special treatment Impervious to leakage can be done.

1. The role of external wall waterproof lightweight blocks:

  Ordinary lightweight foam concrete blocks (such as autoclaved aerated bricks), due to their molding structure and production process problems, make them unable to meet the industry-related requirements in the waterproof performance of the wall, it can be said that there is no waterproof effect, causing the wall surface Plaster emptying, peeling, seepage and other construction common problems.

  Once the above quality problems are caused, the cost of repairing in the later period is high and it cannot be cured. In particular, there are still hidden dangers in the external walls.

  According to the company's long-term research, combined with the German Luca company's patented technology, on the basis of ordinary CLC blocks, the waterproofing requirements of the external walls are targeted to improve, thoroughly solving the common problems of autoclaved aerated concrete.

  The internal structure of the ordinary steam-free air-entraining block is a closed independent air hole, and the air holes are not interconnected. The structure itself has a certain waterproof function, and has a good sound insulation and heat insulation performance. On this basis, it is combined with the German Luca authorized Specialized technology to further optimize the internal structure and the surface of the waterproof performance.

  2. Advantages of external wall waterproof block equipment:

  Environmental Advantage: The production of waterproof block can not only consume a large amount of industrial waste, but also save energy and reduce consumption by using finished products. The production process has no waste water and waste gas, and is environmentally friendly.

  Market Advantages: The requirements for the development of building energy conservation, the current market for new wall materials is vast, we only need to occupy, no development.

  Investment Advantages: The autoclaved aerated concrete products currently used in the market have large investment and long construction period, and at least 10 million yuan, which seriously restricts the development and popularization of the project. And our lightweight waterproof block equipment projects cost less time, from signing up to production only one month, is the first choice for upgrading the medium and small investors and traditional brick factory.

  New technology and new technology: The company's patented technology - special additives, plus a scientific and rational formula, can ensure that the products produced, the main technical indicators in full compliance with national requirements. The company's strong research and development capabilities, can also be based on the user's local different raw materials, local materials, tailor-made formula ratio, to ensure that investors produce qualified products.

  Cost advantage: Waterproof blocks require a wide range of raw materials, and they can be obtained locally on the spot. Fly ash, river sand, slag, slag, tailings, and stone powder can all be used as raw materials (the first of which can be produced)。 The production process is simple, and the autoclave-free waterproof block equipment has less investment, and does not require an autoclave to save a lot of energy.

  Equipment advantages: the production line design combined with the process, reasonable and meticulous; high degree of automation, saving people and effort; the whole microcomputer control, easy to operate: the ratio of ingredients to digital control, accurate measurement. (The company has another: 8 to 10 minutes to quickly demoulding the technical formula and equipment)

New Cutting Saw Advantage: High-strength block brick cutting equipment, fast speed, neat appearance, standard size, no lack of edges and other advantages.

3.Plant site, hydropower and production materials required for equipment

  The production line adopts automatic batching and electronic metering, which has a high degree of automation, accurate measurement, and accurate operation and control. The molding equipment has the characteristics of reasonable structure design, convenient production operation, short molding cycle, high production efficiency, and good product quality. A full set of equipment includes: electronic metering devices, feeding systems, mixing systems, mixing systems, pumping systems, control systems, cutting systems and other components.

  (A) Plant part

  Production plant: height 5m, length 50m, width 20m above area 1000-1500m2

  Product stacking area: area 1500m2------3000m2 (adjustable according to sales volume)

  Equipment Dimensions: 45 meters long * 7.5 meters wide * 5 meters high

  (B) Hydropower section

  Total power of the plant: about 100-200KW

  Production water: about 2400m3/month (according to the output, actual production volume)

  (C) Production raw materials

  1. Cement: 425R Portland cement 2, fly ash raw ash (optional) 3, fine stone powder (optional) 4, sand, (mud content ≤ 2% (optional) 5. slag powder fine powder (optional) 6. Additives (specially for the company)

生产原料选择005


在线预约

 欧复项目在线留言

   了解项目、设备、价格详情,请给我们留言有优惠!

  (24小时内有专业项目经理和您取得联系)
 
姓名:
*
小于等于20个字符(包括A-Z、a-z、0-9、汉字、不含特殊字符)
手机:
*
小于等于32个字符(包含0-9、-、(、)、顿号)
留言:
* 已输入字符:0
小于等于500character
验证码:
   

网站首页 |  关于欧复 | 核心项目 | 设备中心 | 研发平台 | 技术服务 | 新闻动态 | 视频中心 | 合作案例 | 在线留言 | 联系我们

广州欧复微信与手机站二维码

&