欢迎来广州欧复建筑材料有限公司官方网站!

广州欧复阿里巴巴店铺

你的位置:首页Device CenterFoam concrete block equipment > High-precision block production equipment (without plaster)
  • Name: High-precision block production equipment (without plaster)
  • NO.: a001
  • Time: 2016-08-08
  • 浏览次数: 109

  This high-precision block equipment (without plaster), the introduction of Germany's advanced auto-free production technology, mature and reliable, high product strength, lightweight thermal insulation waterproof. The auto-free autoclaved aerated concrete block equipment is used by a small number of people and has a low cost, with a daily production of 100-600 square meters and a quick return on investment.

  1. Introduction of high-precision blocks:

  The high-precision block is based on the general common aerated block, and is manufactured through certain technical means and auxiliary equipment. The product has the advantages of precise dimensions, clear water chestnuts, easy construction and high selling price. It has been applied to large-scale high-end real estate. And building materials. This environmental protection and energy-saving brick is a waste energy-saving wall material. The production process does not have any emissions of waste gas, waste water and waste. It is in full compliance with national industrial policies and is truly low-carbon environmental protection. Note: Foamed concrete is known as lightweight cellular concrete in Europe and Japan, ie Cellular Lightweight Concrete (known as CLC)。

  High-precision block equipment, high-precision block made of fly ash, sand, stone powder, tailings, construction waste, calcium carbide powder as the main raw material. The technical performance of the block products produced by the high-precision block equipment with no autoclave technology meets the relevant requirements of the national Block application. Compared with clay bricks and hollow bricks, it has high strength and is not afraid of impact, good stability, dry shrinkage is not easy to produce cracks, sound insulation and good performance and water resistance and moisture resistance. The non-steamed block bricks overcome the non-absorbent and non-absorbable external walls of clay bricks and hollow bricks, and can be used both inside and outside walls. In particular, its low cost makes it unmatched by clay bricks and hollow bricks.

  2. Features of high-precision block production equipment:

  Because the company uses automatic block production lines, European and American technology is advanced and practical. Small equipment only uses a small amount of mold, 4 to 6 workers can produce, the product can be quickly demoulded (the fastest in the country), equipment can be normal production in the spring, summer, autumn and winter. Through the replacement of different molds, it is possible to produce a variety of products (more than one machine)。 The products are of good quality and conform to the development of green building industrialization. They provide a complete service system from plant planning, equipment installation to technical training.

  New technology and new technology: The company's patented technology - special additives, plus a scientific and rational formula, can ensure that the products produced, the main technical indicators in full compliance with national requirements. The company's strong research and development capabilities, can also be based on the user's local different raw materials, local materials, tailor-made formula ratio, to ensure that investors produce qualified products.

  Cost advantages: Excessive raw materials for steam-free high-precision blocks can be used as raw materials. Local materials, such as fly ash, river sand, slag, slag, tailings, and stone powder, can be used as raw materials. The production process is simple, the investment in autoclave-free block equipment is low, and autoclave is not needed, which saves a lot of energy.

  Equipment advantages: the production line design combined with the process, reasonable and meticulous; high degree of automation, saving people and effort; the whole microcomputer control, easy to operate: the ratio of ingredients to digital control, accurate measurement.

  Cutting Saw Advantage: High-strength high-precision block brick cutting equipment, fast speed, neat appearance, size standards, no lack of edges and other advantages.

3.Plant site, hydropower and production materials required for equipment

  The production line adopts automatic batching and electronic metering, which has a high degree of automation, accurate measurement, and accurate operation and control. The molding equipment has the characteristics of reasonable structure design, convenient production operation, short molding cycle, high production efficiency, and good product quality. A full set of equipment includes: electronic metering devices, feeding systems, mixing systems, mixing systems, pumping systems, control systems, cutting systems and other components.

  (A) Plant part

  Production plant: height 5m, length 50m, width 20m above area 1000-1500m2

  Product stacking area: area 1500m2------3000m2 (adjustable according to sales volume)

  Equipment Dimensions: 45 meters long * 7.5 meters wide * 5 meters high

  (B) Hydropower section

  Total power of the plant: about 100-200KW

  Production water: about 2400m3/month (according to the output, actual production volume)

  (C) Production raw materials

1. Cement: 425R Portland cement 2, fly ash raw ash (optional) 3, fine stone powder (optional) 4, sand, (mud content ≤ 2% (optional) 5. slag powder fine powder (optional) 6. Additives (specially for the company)

生产原料选择005

在线预约

 欧复项目在线留言

   了解项目、设备、价格详情,请给我们留言有优惠!

  (24小时内有专业项目经理和您取得联系)
 
姓名:
*
小于等于20个字符(包括A-Z、a-z、0-9、汉字、不含特殊字符)
手机:
*
小于等于32个字符(包含0-9、-、(、)、顿号)
留言:
* 已输入字符:0
小于等于500character
验证码:
   

网站首页 |  关于欧复 | 核心项目 | 设备中心 | 研发平台 | 技术服务 | 新闻动态 | 视频中心 | 合作案例 | 在线留言 | 联系我们

广州欧复微信与手机站二维码

&